logo

Cases

Home / Cases
Latest company Cases about OnePress Calibration
2023-03-28

OnePress Calibration

OnePress Calibration 1. Start the car, make sure the car is in Petrol state. 2. Wait for the original car water temperature to reach 90 degrees and the gas temperature to reach 70 degrees. 3. Press and hold the switch button for 3~5 seconds and then release it. The ECU will be waiting for auto...
Latest company Cases about 3-2 install water hoses from engine water hose connection to pressure reducer
2023-03-28

3-2 install water hoses from engine water hose connection to pressure reducer

3.2 install water hoses from engine water hose connection to pressure reducer
Latest company Cases about 3-3 install the gas filling valve
2023-03-28

3-3 install the gas filling valve

3-3 install the gas filling valve
Latest company Cases about 3-4 install low carbon steel pipe to connect pressure reducer and filling valve
2023-03-28

3-4 install low carbon steel pipe to connect pressure reducer and filling valve

3-4 install low carbon steel pipe to connect pressure reducer and filling valve
Latest company Cases about 3-5 install ECU wire harness to connect ECU,injector rail, pressure reducer solenoid valve
2023-03-28

3-5 install ECU wire harness to connect ECU,injector rail, pressure reducer solenoid valve

3-5 install ECU wire harness to connect ECU,injector rail, pressure reducer solenoid valve
Latest company Cases about 3-6 Change over switch connection and inline fuse blades connection
2023-03-28

3-6 Change over switch connection and inline fuse blades connection

3-6 Change over switch connection and inline fuse blades connection
Latest company Cases about 4. Install the low carbon steel gas pipe from the gas cylinder to the gas filling valve
2023-03-29

4. Install the low carbon steel gas pipe from the gas cylinder to the gas filling valve

Install the low carbon steel gas pipe from the gas cylinder to the gas filling valve
1